Payment & Shipping Terms:
|Type:||TCT Alloy Hole Saw||Application:||Metal Plate,stainless Steel,aluminum,etc|
|Cutting Depth:||12mm Or 25mm||Shank:||3-Flat Shank|
stainless steel hole saw,
sheet metal hole saw cutter
30mm Carbide Tip TCT Alloy Hole Saw Cutter for Steel Metal Iron Aluminium
This is the Manufacturers recommended maximum drilling depth. You can drill deeper (up to the depth of the inside stop) if you are careful to frequently pull back and clear the swarf from the cut to prevent jamming.
When cutting steel and other metals use a cutting fluid that is appropriate for the job. Once the teeth make contact with the work piece use constant pressure to avoid jamming and overheating. The spring on the centre drill ejects the disc and can be removed if a deeper cut is required.
To cut holes in ceramic tiles first drill a pilot hole with a masonry bit, but don't use hammer action or you will smash the tile. Use the TCT hole saw and keep it cool while drilling by spraying it with water (a trigger spray bottle works well). Take your time and use a slow speed and you will cut a nice clean hole.
For best results use a drill press vise (for all materials) to ensure the hole saw is held steady. Hand held power drills can be used but it's more difficult, especially when drilling bigger holes. Do not use hammer (impact) action regardless of the material being drilled.
1.The gears is made from carbide steel and designed in a sharp and solid way, in order to make the product more stabilized
2.Cutting quick and precise holes in stainless steel, mild steel, iron, copper, brass and wood.
3.Sharp and twisted drill will make the drilling be more easy and effortless
4.Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine
5.Chip removal, with excellent performance, sharp edge, wear-resistant
|Product Name||30mm Carbide Tip TCT Alloy Hole Saw Cutter for Steel Metal Iron Aluminium|
|Brand||SEB or Customized|
|Body Material||Carbon Steel with Heat Treatment|
|Teeth Material||Tungsten Carbide Tip|
|Cutting Depth||12mm or 25mm|
|Shank Type||Tri-Flat Shank|
|Surface Finish||Sand Blasted|
|Features||1.Cuts steel plate, stainless steel, cast iron, aluminum, copper, brass, fiberglass, hard composites
2.Tungsten carbide teeth provide excellent wear and heat resistance. positive cutting angle which provides fast and efficient removal of chips and swarf.
3.3-Ply tooth grind on each tooth delivers maximum performance and makes the saw much more robust than 2-Ply equivalents.
4.Split tip pilot drill prevents damage by gradually guiding cutter to material; no walking.
5.Ejector spring for easy removal of waste slug.
6.Three flat shank provides better chuck grip and reduces slippage.
7.Flexible, convenient and safe to use, suitable for electric hand drill, bench drill.
Contact Person: Jason
Tel: +86 15821643764